Here we have the new engine for the MKII buggy this is a 2001 VW Golf MK IV 1.8T GTI engine, recently pulled from its host ready to be stripped cleaned, sorted and squeezed into the MKII !!!
So here we see the new engine with all the loom removed and tagged and all the secondary Air Injection system removed, I still have the aircon compressor and steering pump to remove.
Test 3d printed part in PETG (Edge) this will replace the standard top breather hose and will allow the use of normal Silicon hoses
Another view of the test 3d printed part (top breather pipe)
Stripping down the buggy for the engine swap, all the cooling system is removed here and the cabling to the ECU is also disconnected, a little more and it should lift out!