Hello All, well managed to get a little done on the buggy recently, got the rear cage re-installed and all the heat barrier applied, suspension back on hubs disks and driveshafts in plus the seats harnesses and got all the center tunnel bolted back down;

so got everything back on as per above and then had issues with the lift - basically it wanted to slide off the lift rather than move!! eventually got it back in the garage and the following weekend decided to get it back on its wheels (even though I dont have the calipers on just yet) - which also meant the lift had to be stripped down to go into storage - in the end my mate asked if he could use the lift at his place so its gone on extended loan! (good news too as the buggy sits too low as the springs are at the wrong rating due to the extra engine weight )

Heres what she looks like now:

Next job is to get the calipers on, and brakes re-connected, got to sort some more wiring out next too - Slowly getting there.....